aut.vn Cảm Biến Đo Khoảng Cách Autonics BD-A1
aut.vn Cảm Biến Đo Khoảng Cách Autonics BD-A1
Power consumption : Max. 2800mW (30VDC@(=))
Control input : No-voltage input
Judgment output : NPN or PNP open collector output (Load current: Max. 100mA)
Alarm output : NPN or PNP open collector output (Load current: Max. 100mA)
Analog voltage output : -5 - 5 V, 0 - 5 V, 1 - 5 V (resistance: 100 Ω, ± 0.05% F.S., at 10 V)
Analog current output : ) 4 - 20 mA (load resistance: ≤ 350 Ω, ± 0.2% F.S., at 16 mA)
Residual voltage : NPN: Max. 1.5V, PNP: Max. 2.5V
9.405.000 ₫
Your price: 5.643.000 ₫
Power supply : 10-30VDC@(=) ±10% (When connecting BD-C Series communication converter, 12-30VDC@(=))
Power consumption : Max. 2800mW (30VDC@(=))
Control input : No-voltage input
Judgment output : NPN or PNP open collector output (Load current: Max. 100mA)
Alarm output : NPN or PNP open collector output (Load current: Max. 100mA)
Analog voltage output : -5 - 5 V, 0 - 5 V, 1 - 5 V (resistance: 100 Ω, ± 0.05% F.S., at 10 V)
Analog current output : ) 4 - 20 mA (load resistance: ≤ 350 Ω, ± 0.2% F.S., at 16 mA)
Residual voltage : NPN: Max. 1.5V, PNP: Max. 2.5V
Protection circuit : Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit
Response time : 0.33, 0.5, 1, 2, 5 ms (5-step adjustment)
Min. display unit : [BD-030 / 065 / 100] 1 ㎛
[BD-300 / 600] 10 ㎛
Display method : Dual display by 6-digit, 11-segment LED
Display range : [BD-030 / 065 / 100] ± 99.999 to ± 99 mm (4-step paramete set)
[BD-300 / 600] ± 999.99 to ± 999 mm (3-step parameter set)
Display cycle : Approx. 100ms
Insulation resistance : Over 20MΩ (at 500VDC megger)
Noise immunity : Square shaped noise by noise simulator (pulse width: 1 ㎲) ± 500 V
Dielectric strength : Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute
Vibration : 1.5 mm amplitude at frequency of 10 to 55Hz in each X, Y, Z direction for 2 hours
Shock : 300m/s² (approx. 30G) in each X, Y, Z direction for 3 times
Environment_Ambient temperature : -10 to 50 ℃, Storage: -15 to 60 ℃ (no freezing or condensation)
Environment_Ambient humidity : Under 85%RH, storage: under 85%RH
Protection structure : IP40 (IEC Standards)
Material : Case: Polycarbonate, Cover: Polycarbonate, Cable: Polyvinyl chloride
Connection method : Connector type
Supported sensor head : Sensor head (BD-□)
Supported comunication converter : Communication converter (BD-C)
Weight : 126 g (≈ 228 g)