Các sản phẩm được gắn thẻ 'Leadshine'

Stepper Drives EtherCAT Leadshine 2EM3E-556
Dual-axis control via one IP address, support CiA402 EtherCAT communication Support operation modes: PP, PV, HM, CSP 2*4 digital inputs, 2*2 optically isolated digital outputs include alarm and brake Low noise and vibration, smooth motion 20-50VDC supply voltage, max 5.6A output current Over voltage, over current, motor cable error protection, etc STO optional

Xuất xứ Trung Quốc, CO, CQ đầy đủ
Bảo hành 1 năm, có đổi mới
0968.053.025

Mua Ngay :

Stepper Drives EtherCAT Leadshine 2EM3E-522
Dual-axis control via one IP address, support CiA402 EtherCAT communication Support operation modes: PP, PV, HM, CSP 2*4 digital inputs, 2*2 optically isolated digital outputs include alarm and brake Low noise and vibration, smooth motion 20-50VDC supply voltage, max 2.2A output current Over voltage, over current, motor cable error protection, etc STO optional

Xuất xứ Trung Quốc, CO, CQ đầy đủ
Bảo hành 1 năm, có đổi mới
0968.053.025

Mua Ngay :

Stepper Drives CANopen Leadshine EM556-CAN
The EM556-CAN is with CANopen standard protocol of DS301 V4.02 and DSP 402 V2.01. It has excellent performance include enhanced reliability, super-low stepper noise, anti-resonance, low-speed ripple smoothing. Adding CANopen allows the drives not only to support operating modes including Profile Position (PP), Profile Velocity (PV), Homing (HM), etc, but also to build a CANopen networks up to 127 nodes. Therefore, Leadshine EM-CAN series is an ideal choice for field-bus applications, which need high reliability and good performance.

Xuất xứ Trung Quốc, CO, CQ đầy đủ
Bảo hành 1 năm, có đổi mới
0968.053.025

Mua Ngay :

Stepper Drives CANopen Leadshine EM522-CAN
The EM522-CAN is with CANopen standard protocol of DS301 V4.02 and DSP 402 V2.01. It has excellent performance include enhanced reliability, super-low stepper noise, anti-resonance, low-speed ripple smoothing. Adding CANopen allows the drives not only to support operating modes including Profile Position (PP), Profile Velocity (PV), Homing (HM), etc, but also to build a CANopen networks up to 127 nodes. Therefore, Leadshine EM-CAN series is an ideal choice for field-bus applications, which need high reliability and good performance.

Xuất xứ Trung Quốc, CO, CQ đầy đủ
Bảo hành 1 năm, có đổi mới
0968.053.025

Mua Ngay :

Stepper Drives CANopen Leadshine DMA882-CAN
The DM series consists of stepper drives adopting Leadshine latest advanced stepper control technology. Those stepper drives are highly reliable with good performance and highly competitive cost. They can power a wide range of stepper motors from NEMA 8 to NEMA 34 (model dependent). DM stepper drives are easy to configure and setup. Output current and micro step resolution can be simply set up via DIP switches.

Xuất xứ Trung Quốc, CO, CQ đầy đủ
Bảo hành 1 năm, có đổi mới
0968.053.025

Mua Ngay :

Stepper Drives Modbus RTU Leadshine EM2RS-A882
EM2RS Series are stepper drive based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. They built-in PR feature with 16-segment position table (PR Mode) can save additional controllers in most of point-to-point applications, to greatly enhance system reliability and reduce the cost. EM2RS Series also support the feature of teaching, the operation modes of Profile Position, Profile Velocity and Homing. EM2RS-A882 can power 2-phase NEMA 24, 34 stepper motors.

Xuất xứ Trung Quốc, CO, CQ đầy đủ
Bảo hành 1 năm, có đổi mới
0968.053.025

Mua Ngay :

Stepper Drives Modbus RTU Leadshine EM2RS-870
EM2RS Series are stepper drive based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. They built-in PR feature with 16-segment position table (PR Mode) can save additional controllers in most of point-to-point applications, to greatly enhance system reliability and reduce the cost. EM2RS Series also support the feature of teaching, the operation modes of Profile Position, Profile Velocity and Homing. EM2RS-870 can power 2-phase NEMA 23, 24, 34 stepper motors.

Xuất xứ Trung Quốc, CO, CQ đầy đủ
Bảo hành 1 năm, có đổi mới
0968.053.025

Mua Ngay :

Stepper Drives Modbus RTU Leadshine EM2RS-556
EM2RS Series are stepper drive based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. They built-in PR feature with 16-segment position table (PR Mode) can save additional controllers in most of point-to-point applications, to greatly enhance system reliability and reduce the cost. EM2RS Series also support the feature of teaching, the operation modes of Profile Position, Profile Velocity and Homing. EM2RS-556 can power 2-phase NEMA 17, 23, 24 stepper motors.

Xuất xứ Trung Quốc, CO, CQ đầy đủ
Bảo hành 1 năm, có đổi mới
0968.053.025

Mua Ngay :

Stepper Drives Modbus RTU Leadshine EM2RS-522
Standard Isolated RS485 Modbus HMI, PLC or External I/O start motion 7 Programmable Inputs: Limit, Origin, Quick stop, Alarm reset, Enable, JOG or Position Table inputs 3 Programmable Outputs: Alarm, Brake, Homing / Instruction / Path complete Modes of Operation: Velocity, Position, Homing Support Functions: Teaching, Interrupt, Skip, Suspend, Circulate motion 20-50VDC supply voltage, max 2.2A output current

Xuất xứ Trung Quốc, CO, CQ đầy đủ
Bảo hành 1 năm, có đổi mới
0968.053.025

Mua Ngay :