Power supply voltage | 100 to 240 VAC 50/60 Hz |
---|
Allowable power supply voltage range | 85 to 110% of the power supply voltage |
---|
Power consumption | 18 VA max. (At maximum load) |
---|
External power supply | 12 VDC ±10% 80 mA |
---|
Input type | Pulse (NPN/voltage pulse input) |
---|
Output type | Judgment output: Transistor Comparative output: OUT1, OUT2, OUT3, OUT4, OUT5 Transfer output: Communications (RS-232C) |
---|
Pulse measurement input | Function | F1: Individual inputs F2: Phase differential inputs F3: Pulse counting input |
---|
Contact input (dry contact input) | 30 Hz max. ON/OFF pulse width of 15 ms min. |
---|
No contact voltage pulse | F1: 0 to 30 kHz ON/OFF pulse width of 16 µs min. F2: 0 to 25 kHz ON/OFF pulse width of 20 µs min. F3: 0 to 50 kHz ON/OFF pulse width of 9 µs min. |
---|
Voltage level | ON voltage: 4.5 to 30 V, OFF voltage: -30 to 2 V, input impedance: 10 kΩ |
---|
Open collector | F1: 0 to 30 kHz ON/OFF pulse width of 16 µs min. F2: 0 to 25 kHz ON/OFF pulse width of 20 µs min. F3: 0 to 50 kHz ON/OFF pulse width of 9 µs min. |
---|
Measurement range | F1: ±2 gigacounts F2: ±2 gigacounts F3: 0 to 4 gigacounts |
---|
Event input | Number of input | 5 point |
---|
Input method | NO-Voltage contact/NPN open collector |
---|
Event name | Hold input Reset input Compensation input |
---|
Connection method | Terminal blocks |
---|
Contact | ON: 1 kΩ max. OFF: 100 kΩ min. |
---|
No-contact | ON residual voltage: 2 V max. OFF leakage current: 4 mA max. Maximum applied voltage: 30 V max.DC Leakage current: 0.1 mA max. |
---|
Judgment output | Transistor output | NPN open collector Maximum load voltage: 24 V max.DC Maximum load current: 50 mA max. Leakage current: 100 µA max. |
---|
Display | Display method | Negative LCD (backlit LED) 7-segment digital display |
---|
Digits | 5 digit (-19999 to 99999) |
---|
Character height | PV: 14.2 mm (green/red) SV: 4.9 mm (green) |
---|
Comparative output response time | 1 ms max. (time until the comparative output is made when there is a forced sudden change in the input signal from 15% to 95% or 95% to 15%.) |
---|
Insulation resistance | 20 MΩ min. (at 500 VDC) |
---|
Dielectric strength | Between the entire external terminal and case: 2,300 VAC 1 min |
---|
Noise immunity | ±1,500 V at power supply terminals in normal or common mode (waveform with 1-ns rising edge and pulse width of 1 µs/100 ns) |
---|
Vibration resistance | Malfunction: 10 to 55 Hz, Acceleration: 50 m/s2, 5 min 10 sweeps each in X, Y, and Z directions |
---|
Shock resistance | Malfunction: 150 m/s2, 3 times each in 3 axes 6 directions |
---|
Degree of protection | Front: NEMA4X for indoor use (equivalent to IP66) Case rear: IP20 Terminals: IP00 + finger protection (VDE0106/100) |
---|
Memory protection | EE-PROM (non-volatile memory) Number of rewrites: 100,000 |
---|
Ambient temperature | Operating: -10 to 55 ℃ (with no freezing or condensation) Storage: -25 to 65 ℃ (with no freezing or condensation) |
---|
Ambient humidity | Operating: 25 to 85 % |
---|
Accessories | Waterproof packing, Fixtures, Terminal Cover, Unit label, Instruction manual |
---|
Weight | Approx. 300 g |
---|