Power supply voltage | 24 VDC 24 VAC 50/60 Hz |
---|
Allowable power supply voltage range | 85 to 110% of the power supply voltage |
---|
Power consumption | 7 W max. (at maximum load)/11 VA max. (at maximum load) |
---|
External power supply | 5 VDC ±5% 100 mA |
---|
Input type | Load dell/DC voltage |
---|
Output type | Judgment output: Transistor Comparative output: HH, H, PASS, L, LL |
---|
Voltage measurement input | Measurement range | A: 0.00 to 199.99 mV B: 0.000 to 19.999 mV C: ±100.00 mV D: ±199.99 mV |
---|
Accuracy | A: ±0.1% rdg ±1 digit max. B: ±0.1% rdg ±5 digit max. C: ±0.1% rdg ±3 digit max. D: ±0.1% rdg ±1 digit max. |
---|
Input impedance | 1 MΩ min. |
---|
Allowable instantaneous input (30 s) | ±200 V |
---|
Load cell measurement input | Measurement range | A: 0.00 to 199.99 mV B: 0.000 to 19.999 mV C: ±100.00 mV D: ±199.99 mV |
---|
Accuracy | A: ±0.1% rdg ±1 digit max. B: ±0.1% rdg ±5 digit max. C: ±0.1% rdg ±3 digit max. D: ±0.1% rdg ±1 digit max. |
---|
Input impedance | 1 MΩ min. |
---|
Allowable instantaneous input (30 s) | ±200 V |
---|
Event input | Number of input | 5 point |
---|
Input method | NO-Voltage contact/NPN open collector |
---|
Event name | Timing input Startup compensation timer input Hold input Forced-zero input Reset input |
---|
Connection method | Terminal blocks |
---|
Contact | ON: 1 kΩ max. OFF: 100 kΩ min. |
---|
No-contact | ON residual voltage: 2 V max. (TIMING input 3 V max.) OFF leakage current: 4 mA max. (TIMING input 17 mA max.) Maximum applied voltage: 30 V max.DC Leakage current: 0.1 mA max. (TIMING input 1.5 mA max.) |
---|
Judgment output | Transistor output | NPN open collector Maximum load voltage: 24 V max.DC Maximum load current: 50 mA max. Leakage current: 100 µA max. |
---|
Display | Display method | Negative LCD (backlit LED) 7-segment digital display |
---|
Digits | 5 digit (-19999 to 99999) |
---|
Character height | PV: 14.2 mm (green/red) SV: 4.9 mm (green) |
---|
Sampling period | 50 times/second (20 ms) |
---|
Comparative output response time | 100 ms max. (time until the comparative output is made when there is a forced sudden change in the input signal from 15% to 95% or 95% to 15%.) |
---|
Insulation resistance | 20 MΩ min. (at 500 VDC) |
---|
Dielectric strength | Between the entire external terminal and case: 2,300 VAC 1 min |
---|
Noise immunity | ±1,500 V at power supply terminals in normal or common mode (waveform with 1-ns rising edge and pulse width of 1 µs/100 ns) |
---|
Vibration resistance | Malfunction: 10 to 55 Hz, Acceleration: 50 m/s2, 5 min 10 sweeps each in X, Y, and Z directions |
---|
Shock resistance | Malfunction: 150 m/s2, 3 times each in 3 axes 6 directions |
---|
Degree of protection | Front: NEMA4X for indoor use (equivalent to IP66) Case rear: IP20 Terminals: IP00 + finger protection (VDE0106/100) |
---|
Memory protection | EE-PROM (non-volatile memory) Number of rewrites: 100,000 |
---|
Ambient temperature | Operating: -10 to 55 ℃ (with no freezing or condensation) Storage: -25 to 65 ℃ (with no freezing or condensation) |
---|
Ambient humidity | Operating: 25 to 85 % |
---|
Accessories | Waterproof packing, Fixtures, Terminal Cover, Unit label, Instruction manual |
---|
Weight | Approx. 300 g |
---|