Power supply voltage | 100 to 240 VAC 50/60 Hz |
---|
Allowable power supply voltage range | 85 to 110% of the power supply voltage |
---|
Power consumption | 18 VA max. (at maximum load) |
---|
External power supply | 12 VDC ±10% 80 mA |
---|
Input type | DC voltage/DC current |
---|
Output type | Judgment output: Contact Comparative output: H, PASS, L |
---|
Current measurement input | Measurement range | 0-20: 0.000 to 20.000 mA 4-20: 4.000 to 20.000 mA |
---|
Indication range | 0-20: -2.000 to 22.000 mA 4-20: 2.000 to 22.000 mA |
---|
Accuracy | One input: ±0.1% FS ±1 digit max. Two inputs: ±0.2% FS ±1 digit max. |
---|
Input impedance | 120 Ω max. |
---|
Max. permissible input | ±31 mA |
---|
Voltage measurement input | Measurement range | 0-5: 0.000 to 5.000 V 1-5: 1.000 to 5.000 V 5: ±5.000 V 10: ±10.000 V |
---|
Indication range | 0-5: -0.500 to 5.500 V 1-5: 0.500 to 5.500 V 5: ±5.500 V 10: ±11.000 V |
---|
Accuracy | One input: ±0.1% FS ±1 digit max. Two inputs: ±0.2% FS ±1 digit max. |
---|
Input impedance | 1 MΩ min. |
---|
Max. permissible input | ±10 V (±14.5 V at ±10 V) |
---|
Event input | Number of input | 8 point |
---|
Input method | NO-Voltage contact/NPN open collector |
---|
Event name | Timing input Startup compensation timer input Hold input Forced-zero input Reset input Bank input |
---|
Connection method | Connector |
---|
Contact | ON: 1 kΩ max. OFF: 100 kΩ min. |
---|
No-contact | ON residual voltage: 2 V max. (TIMING input 3 V max.) OFF leakage current: 4 mA max. (TIMING input 17 mA max.) Maximum applied voltage: 30 V max.DC Leakage current: 0.1 mA max. (TIMING input 1.5 mA max.) |
---|
Judgment output | Contact output | H, L (SPDT) PASS 1c Rated load: Resistive load: 250 VAC 5 A (cosφ=1)/30 VDC 5 A (L/R=0 ms), Inductive load: 250 VAC 1 A (Close cosφ=0.4)/30 VDC 1 A (L/R=7 ms) Life expectancy: 100,000 operations (Electrical)/5,000,000 operations (Mechanical) |
---|
Display | Display method | Negative LCD (backlit LED) 7-segment digital display |
---|
Digits | 5 digit (-19999 to 99999) |
---|
Character height | PV: 14.2 mm (green/red) SV: 4.9 mm (green) |
---|
A/D conversion method | Sequential comparison system |
---|
Sampling period | One input: 0.5 ms Two inputs: 1.0 ms |
---|
Insulation resistance | 20 MΩ min. (at 500 VDC) |
---|
Dielectric strength | Between the entire external terminal and case: 2,300 VAC 1 min |
---|
Noise immunity | ±1,500 V at power supply terminals in normal or common mode (waveform with 1-ns rising edge and pulse width of 1 µs/100 ns) |
---|
Vibration resistance | Malfunction: 10 to 55 Hz, Acceleration: 50 m/s2, 5 min 10 sweeps each in X, Y, and Z directions |
---|
Shock resistance | Malfunction: 100 m/s2, 3 times each in 3 axes 6 directions |
---|
Degree of protection | Front: NEMA4X for indoor use (equivalent to IP66) Case rear: IP20 Terminals: IP00 + finger protection (VDE0106/100) |
---|
Memory protection | EE-PROM (non-volatile memory) Number of rewrites: 100,000 |
---|
Ambient temperature | Operating: -10 to 55 ℃ (with no freezing or condensation) Storage: -25 to 65 ℃ (with no freezing or condensation) |
---|
Ambient humidity | Operating: 25 to 85 % |
---|
Accessories | Waterproof packing, Fixtures, Terminal Cover, Unit label, Instruction manual |
---|
Weight | Approx. 300 g |
---|