Power supply voltage | 100 to 240 VAC 50/60 Hz |
---|
Allowable power supply voltage range | 85 to 110% of the power supply voltage |
---|
Power consumption | 18 VA max. (at maximum load) |
---|
External power supply | 12 VDC ±10% 80 mA |
---|
Input type | Pulse (NPN/voltage pulse input) |
---|
Output type | Judgment output: Contact Comparative output: H, L Transfer output: Linear voltage |
---|
Pulse measurement input | Function | F1: Rpm/circumferenitial speed/Instantaneous flowrate F2: Absolute raito F3: Error raito F4: Accuracy F5: Flow rate ratio F6: Passing time |
---|
Contact input (dry contact input) | 30 Hz max. ON/OFF pulse width of 15 ms min. |
---|
No contact voltage pulse | 50 kHz max. ON/OFF pulse width of 9 µs min. |
---|
Voltage level | ON voltage: 4.5 to 30 V, OFF voltage: -30 to 2 V, input impedance: 10 kΩ |
---|
Open collector | 50 kHz max. ON/OFF pulse width of 9 µs min. |
---|
Measurement range | F1 to F6: 0.5 mHz to 50 kHz (for voltage pulse/open collector sensors) |
---|
Accuracy | F1, F6: ±0.006% rdg ±1 digit F2 to F5: ±0.02% rdg ±1 digit (23±5 ℃, for voltage pulse/open collector sensors) |
---|
Judgment output | Contact output | H, L (SPDT) Rated load: Resistive load: 250 VAC 5 A (cosφ=1)/30 VDC 5 A (L/R=0 ms), Inductive load: 250 VAC 1 A (Close cosφ=0.4)/30 VDC 1 A (L/R=7 ms) Life expectancy: 100,000 operations (Electrical)/5,000,000 operations (Mechanical) |
---|
Linear output | Linear voltage 0 to 5 VDC/1 to 5 VDC/0 to 10 VDC Allowable load impedance: 5 kΩ min. Resolution: Approx. 10000 Output error: ±0.5% FS (1 V or less: ±0.15 V, not output for 0 or less) |
---|
Display | Display method | Negative LCD (backlit LED) 7-segment digital display |
---|
Digits | 5 digit (-19999 to 99999) |
---|
Character height | PV: 14.2 mm (green/red) SV: 4.9 mm (green) |
---|
Linear output response time | 110 ms max. (time until the final analog output value is reached when there is a forced sudden change in the input signal from 15% to 95% or 95% to 15%.) |
---|
Insulation resistance | 20 MΩ min. (at 500 VDC) |
---|
Dielectric strength | Between the entire external terminal and case: 2,300 VAC 1 min |
---|
Noise immunity | ±1,500 V at power supply terminals in normal or common mode (waveform with 1-ns rising edge and pulse width of 1 µs/100 ns) |
---|
Vibration resistance | Malfunction: 10 to 55 Hz, Acceleration: 50 m/s2, 5 min 10 sweeps each in X, Y, and Z directions |
---|
Shock resistance | Malfunction: 100 m/s2, 3 times each in 3 axes 6 directions |
---|
Degree of protection | Front: NEMA4X for indoor use (equivalent to IP66) Case rear: IP20 Terminals: IP00 + finger protection (VDE0106/100) |
---|
Memory protection | EE-PROM (non-volatile memory) Number of rewrites: 100,000 |
---|
Ambient temperature | Operating: -10 to 55 ℃ (with no freezing or condensation) Storage: -25 to 65 ℃ (with no freezing or condensation) |
---|
Ambient humidity | Operating: 25 to 85 % |
---|
Accessories | Waterproof packing, Fixtures, Terminal Cover, Unit label, Instruction manual |
---|
Weight | Approx. 300 g |
---|