Power supply voltage | 24 VDC |
---|
Allowable power supply voltage range | 85 to 110% of the power supply voltage |
---|
Power consumption | 2.5 W max. (At maximum load with all indicators lit) |
---|
Input type | DC voltage/DC current/Pulse (NPN) |
---|
Output type | Judgment output: Contact Comparative output: OUT1, OUT2 |
---|
Current measurement input | Measurement range | 4-20: 4 to 20 mA |
---|
Indication range | 4-20: 0.00 to 22.00 mA |
---|
Accuracy | ±0.1% FS ±1 digit max. (23±3 ℃) |
---|
Input impedance | 60 Ω max. |
---|
Voltage measurement input | Measurement range | 1-5: 1 to 5 V 5: ±5 V 10: ±10 V |
---|
Indication range | 1-5: 0.000 to 5.500 V 5: -5.500 to 5.500 V 10: -11.00 to 11.00 V |
---|
Accuracy | 1-5: ±0.1% FS ±1 digit max. (23±3 ℃) 5: ±0.1% FS ±1 digit max. (23±5 ℃) 10: ±0.1% FS ±1 digit max. (23±5 ℃) |
---|
Input impedance | 1 MΩ min. |
---|
Pulse measurement input | No-voltage contact | 30 Hz max. ON/OFF pulse width of 16 ms min. |
---|
Open collector | 5 kHz max. ON/OFF pulse width of 90 µs min. |
---|
Measurement range | 30 Hz: 0.05 to 30.00 Hz 5 kHz: 0.05 to 5000 Hz |
---|
Accuracy | ±0.1% FS ±1 digit max. (23±5 ℃) |
---|
Event input | Event name | Present value hold or forced zero (Enabled only when using DC voltage/current input) |
---|
Judgment output | Contact output | 2 output (SPST-NO) Rated load: Resistive load: 1 A at 30 VDC Minimum applicable load: 10 mV 10 µA (failure level: P Reference value) Life expectancy: 100,000 operations min. (Electrical)/50 million operations min. (Mechanical) |
---|
Display | Display method | Negative LCD (backlit LED) 7-segment digital display, and single illuminated display |
---|
Digits | 5 digit (-19999 to 99999) |
---|
Character height | 7 mm (green/red) |
---|
A/D conversion method | Double integral method |
---|
Sampling period | 250 ms |
---|
Insulation resistance | Between the entire external terminal and case: 20 MΩ min. (at 500 VDC) Between inputs, outputs, and power supply: 20 MΩ min. (at 500 VDC) |
---|
Dielectric strength | Between the entire external terminal and case: 1,000 VAC 1min |
---|
Noise immunity | ±480 V at power supply terminals in normal mode ±1,500 V at power supply terminals in common mode (waveform with 1-ns rising edge ±1 µs/100 ns) |
---|
Vibration resistance | Malfunction: 10 to 55 Hz, Single amplitude 0.35 mm, 10 min each in X, Y, and Z directions |
---|
Shock resistance | Malfunction: 100 m/s2, 3 times each in 6 directions |
---|
Degree of protection | Front: NEMA4X for indoor use (equivalent to IP66) Case rear: IP20 Terminals: IP00 + finger protection (VDE0106/100) |
---|
Memory protection | Non-volatile memory (Number of rewrites: 100,000) |
---|
Ambient temperature | Operating: -10 to 55 ℃ (with no freezing or condensation) Storage: -25 to 65 ℃ (with no freezing or condensation) |
---|
Ambient humidity | Operating: 25 to 85 % |
---|
Accessories | Instruction manual, Rubber packing, Fixtures, Terminal Cover |
---|
Weight | Approx. 100 g |
---|