| Type | Advanced model |
|---|
| Input/Output | 2 outputs |
|---|
| Sensing distance (Reference) | E32-T11R | Standard mode: 1500 mm
High-speed mode: 1050 mm
Super-high-speed mode: 280 mm
Giga mode: 3000 mm |
|---|
| E32-D11R | Standard mode: 520 mm
High-speed mode: 360 mm
Super-high-speed mode: 100 mm
Giga mode: 1260 mm |
|---|
| Light source | Red, 4-element LED (Emission wave length: 625 nm) |
|---|
| Power supply voltage | 10 to 30 VDC ripple (p-p) 10% included |
|---|
| Power consumption | Normal mode: 920 mW max. (at power supply voltage of 24 V, current consumption: 38 mA max.)
Eco ON: 680 mW max. (at power supply voltage of 24 V, current consumption: 28 mA max.)
Eco LO: 800 mW max. (at power supply voltage of 24 V, current consumption: 33 mA max.) |
|---|
| Operation mode | Light-ON/Dark-ON selectable |
|---|
| Control output | PNP open collector
30 V max.DC
Load current: 100 mA max. (Groups of 1 to 3 units)/20 mA max. (at 4 or more units are connected)
Residual voltage: 1 V max. (10 mA max.)/2 V max. (10 to 100 mA)
OFF current: 0.1 mA max. |
|---|
| Response time | Operate | Standard mode: 1 ms
High-speed mode (HS): 250 µs
Super-high-speed mode (SHS): 32 µs
Giga-power Mode (GIGA): 16 ms |
|---|
| Reset | Standard mode: 1 ms
High-speed mode (HS): 250 µs
Super-high-speed mode (SHS): 32 µs
Giga-power Mode (GIGA): 16 ms |
|---|
| Protective circuit | Output short-circuit protection
Output reverse polarity protection
Power supply reverse polarity protection |
|---|
| Indicator | Digital display: 7-segment displays (Sub digital display: green, Main digital display: white)
Display orientation: Switchable between normal and reversed
Indicators: OUT indicator (orange), L/D indicator (orange), Smart Tuning indicator (blue), DPC indicator (orange), and OUT selection indicator (orange) |
|---|
| Number of mutual interference prevention | 10 units (can not be used in the Super-high-speed Mode) |
|---|
| Function | Auto power control, Dynamic power control, Timer, ZERO reset, Resetting setting, ECO mode, BANK switch, Sensor OFF setting, Power tuning, Output 1 setting, Output 2 setting, Hysteresis setting |
|---|
| Sensitivity setting | Smart Tuning (2-point tuning, full auto tuning, position tuning, maximum sensitivity tuning, power tuning, or percentage tuning (-99% to 99%)) or manual adjustment |
|---|
| Ambient illuminance | Receiver side, Incandescent lamp: 20000 lux max. Sunlight: 30000 lux max. |
|---|
| Ambient temperature range (Operating) | Groups of 1 to 2 units: -25 to 55 ℃
Groups of 3 to 10 units: -25 to 50 ℃
Groups of 11 to 16 units: -25 to 45 ℃
Groups of 17 to 30 units: -25 to 40 ℃
(with no freezing or condensation) |
|---|
| Ambient temperature range (Storage) | -30 to 70 ℃ (with no freezing or condensation) |
|---|
| Ambient humidity range (Operating) | 35 to 85 % (with no condensation) |
|---|
| Ambient humidity range (Strage) | 35 to 85 % (with no condensation) |
|---|
| Insulation resistance | 20 MΩ or higher (500 VDC megger) |
|---|
| Dielectric strength | 1,000 VAC 50/60 Hz 1 min |
|---|
| Vibration resistance | Destruction: 10 to 55 Hz, 1.5 mm double amplitude each in X, Y, and Z directions for 2 h |
|---|
| Shock resistance | Destruction: 500 m/s2 3 times each in X, Y, and Z directions |
|---|
| Connection method | M8 connector models |
|---|
| Mass | Main Unit: Approx. 25 g
Package: Approx. 65 g |
|---|
| Mounting method | DIN Track、Mounting Bracket |
|---|
| Material | Case: Polycarbonate (PC)
Cover: Polycarbonate (PC) |
|---|
| Applicable connector | XS3F-M421-402-A
XS3F-M421-405-A
XS3F-M422-402-A
XS3F-M422-405-A |
|---|
| Accessories | Instruction manual |
|---|
