Stepper Drives
EtherCAT
Leadshine 2EM3E-556
Dual-axis control via one IP address, support CiA402
EtherCAT communication
Support operation modes: PP, PV, HM, CSP
2*4 digital inputs, 2*2 optically isolated digital outputs include alarm and brake
Low noise and vibration, smooth motion
20-50VDC supply voltage, max 5.6A output current
Over voltage, over current, motor cable error protection, etc
STO optional
Xuất xứ Trung Quốc, CO, CQ đầy đủ
Bảo hành 1 năm, có đổi mới
0968.053.025
Stepper Drives
EtherCAT
Leadshine 2EM3E-870
Dual-axis control via one IP address, support CiA402
EtherCAT communication
Support operation modes: PP, PV, HM, CSP
2*4 digital inputs, 2*2 optically isolated digital outputs include alarm and brake
Low noise and vibration, smooth motion
20-80VDC supply voltage, max 7.0A output current
Over voltage, over current, motor cable error protection, etc
STO optional
Xuất xứ Trung Quốc, CO, CQ đầy đủ
Bảo hành 1 năm, có đổi mới
0968.053.025
Stepper Drives
EtherCAT
Leadshine EM3E-570B
EM3E series drives support operating modes: Profile Position (PP), Profile Velocity (PV), Homing(HM) , Cyclic Synchronous Position (CSP). The products can be matched with most of EtherCAT controller/PLC such as Beckhoff, Omron, Trio, etc.
Xuất xứ Trung Quốc, CO, CQ đầy đủ
Bảo hành 1 năm, có đổi mới
0968.053.025
Stepper Drives
Modbus RTU
Leadshine EM2RS-A882
EM2RS Series are stepper drive based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. They built-in PR feature with 16-segment position table (PR Mode) can save additional controllers in most of point-to-point applications, to greatly enhance system reliability and reduce the cost. EM2RS Series also support the feature of teaching, the operation modes of Profile Position, Profile Velocity and Homing. EM2RS-A882 can power 2-phase NEMA 24, 34 stepper motors.
Xuất xứ Trung Quốc, CO, CQ đầy đủ
Bảo hành 1 năm, có đổi mới
0968.053.025
Stepper Motors
CM Series
Leadshine 28CM013
2 phase, NEMA 11 frame size
51 mm (2.0 inch) long
1.2 A phase current
0.13 N.m (18 oz-in) holding torque
4.5 mm (0.177 inch) shaft size
Built with high quality materials including bearings and shaft made by Japanese manufacturers
High precision, low motor heating, and low vibration
Xuất xứ Trung Quốc, CO, CQ đầy đủ
Bảo hành 1 năm, có đổi mới
0968.053.025
Stepper Motors
CM Series
Leadshine 42CM08
2 phase, NEMA 17 frame size
60 mm (2.36 inch) long
2.5 A phase current
0.8 N.m (114 oz-in) holding torque
5 mm (0.197 inch) shaft size
Built with high quality materials including bearings and shaft made by Japanese manufacturers
High precision, low motor heating, and low vibration
Xuất xứ Trung Quốc, CO, CQ đầy đủ
Bảo hành 1 năm, có đổi mới
0968.053.025
Stepper Motors
CM Series
Leadshine 57CM23
2 phase, NEMA 23 frame size
76 mm (2.99 inch) long
5 A phase current
2.3 N.m (326 oz-in) holding torque
8 mm (0.315 inch) shaft size
Built with high quality materials including bearings and shaft made by Japanese manufacturers
High precision, low motor heating, and low vibration
Xuất xứ Trung Quốc, CO, CQ đầy đủ
Bảo hành 1 năm, có đổi mới
0968.053.025
Stepper Motors
CM Series
Leadshine 57CM23-4A
2 phase, NEMA 23 frame size
76 mm (2.99 inch) long
4 A phase current
2.3 N.m (326 oz-in) holding torque
8 mm (0.315 inch) shaft size
Built with high quality materials including bearings and shaft made by Japanese manufacturers
High precision, low motor heating, and low vibration
Xuất xứ Trung Quốc, CO, CQ đầy đủ
Bảo hành 1 năm, có đổi mới
0968.053.025
Stepper Motors
CM Series
Leadshine 86CM120
2 phase, NEMA 34 frame size
129 mm (5.08 inch) long
6 A phase current
12 N.m (1700 oz-in) holding torque
14 mm (0.551 inch) shaft size
Built with high quality materials including bearings and shaft made by Japanese manufacturers
High precision, low motor heating, and low vibration
Xuất xứ Trung Quốc, CO, CQ đầy đủ
Bảo hành 1 năm, có đổi mới
0968.053.025
