Stepper Drives
Modbus RTU
Leadshine EM2RS-A882
EM2RS Series are stepper drive based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. They built-in PR feature with 16-segment position table (PR Mode) can save additional controllers in most of point-to-point applications, to greatly enhance system reliability and reduce the cost. EM2RS Series also support the feature of teaching, the operation modes of Profile Position, Profile Velocity and Homing. EM2RS-A882 can power 2-phase NEMA 24, 34 stepper motors.
Xuất xứ Trung Quốc, CO, CQ đầy đủ
Bảo hành 1 năm, có đổi mới
0968.053.025
Stepper Motors
CM Series
Leadshine 20CM003
2 phase, NEMA 8 frame size
33 mm (1.30 inch) long
0.6 A phase current
0.03 N.m (4 oz-in) holding torque
4 mm (0.157 inch) shaft size
Built with high quality materials including bearings and shaft made by Japanese manufacturers
High precision, low motor heating, and low vibration
Xuất xứ Trung Quốc, CO, CQ đầy đủ
Bảo hành 1 năm, có đổi mới
0968.053.025
Stepper Motors
CM Series
Leadshine 28CM006
2 phase, NEMA 11 frame size
32 mm (1.26 inch) long
1.2 A phase current
0.06 N.m (9 oz-in) holding torque
4.5 mm (0.177 inch) shaft size
Built with high quality materials including bearings and shaft made by Japanese manufacturers
High precision, low motor heating, and low vibration
Xuất xứ Trung Quốc, CO, CQ đầy đủ
Bảo hành 1 năm, có đổi mới
0968.053.025
Stepper Motors
CM Series
Leadshine 28CM010
2 phase, NEMA 11 frame size
41 mm (1.61 inch) long
1.2 A phase current
0.1 N.m (14 oz-in) holding torque
4.5 mm (0.177 inch) shaft size
Built with high quality materials including bearings and shaft made by Japanese manufacturers
High precision, low motor heating, and low vibration
Xuất xứ Trung Quốc, CO, CQ đầy đủ
Bảo hành 1 năm, có đổi mới
0968.053.025
Stepper Motors
CM Series
Leadshine 28CM013
2 phase, NEMA 11 frame size
51 mm (2.0 inch) long
1.2 A phase current
0.13 N.m (18 oz-in) holding torque
4.5 mm (0.177 inch) shaft size
Built with high quality materials including bearings and shaft made by Japanese manufacturers
High precision, low motor heating, and low vibration
Xuất xứ Trung Quốc, CO, CQ đầy đủ
Bảo hành 1 năm, có đổi mới
0968.053.025
Stepper Motors
CM Series
Leadshine 42CM02
2 phase, NEMA 17 frame size
33 mm (1.30 inch) long
1.5 A phase current
0.21 N.m (30 oz-in) holding torque
5 mm (0.197 inch) shaft size
Built with high quality materials including bearings and shaft made by Japanese manufacturers
High precision, low motor heating, and low vibration
Xuất xứ Trung Quốc, CO, CQ đầy đủ
Bảo hành 1 năm, có đổi mới
0968.053.025
Stepper Motors
CM Series
Leadshine 42CM04
2 phase, NEMA 17 frame size
40 mm (1.57 inch) long
1.5 A phase current
0.4 N.m (57 oz-in) holding torque
5 mm (0.197 inch) shaft size
Built with high quality materials including bearings and shaft made by Japanese manufacturers
High precision, low motor heating, and low vibration
Xuất xứ Trung Quốc, CO, CQ đầy đủ
Bảo hành 1 năm, có đổi mới
0968.053.025
Stepper Motors
CM Series
Leadshine 42CM06
2 phase, NEMA 17 frame size
47 mm (1.85 inch) long
2.5 A phase current
0.6 N.m (85 oz-in) holding torque
5 mm (0.197 inch) shaft size
Built with high quality materials including bearings and shaft made by Japanese manufacturers
High precision, low motor heating, and low vibration
Xuất xứ Trung Quốc, CO, CQ đầy đủ
Bảo hành 1 năm, có đổi mới
0968.053.025
Stepper Motors
CM Series
Leadshine 42CM08
2 phase, NEMA 17 frame size
60 mm (2.36 inch) long
2.5 A phase current
0.8 N.m (114 oz-in) holding torque
5 mm (0.197 inch) shaft size
Built with high quality materials including bearings and shaft made by Japanese manufacturers
High precision, low motor heating, and low vibration
Xuất xứ Trung Quốc, CO, CQ đầy đủ
Bảo hành 1 năm, có đổi mới
0968.053.025
